 |
610 Loop Vehicle Detector
The 610 Loop Vehicle Detector is designed to accommodate
numerous applications and intelligently adjust to environmental
conditions, virtually eliminating false detection. It is
intended to be connected to a 3- to 5-turn preformed loop such
as the Model 865 or a saw-cut loop such as
Models 866 or 867. Details. |
 |
865 Preformed Loop
The
five-turn, PVC-encased, 865 Preformed Loop is designed
for on-site installation prior to pouring pavement material, and because
it is self-contained, the 865 greatly reduces installation time.
This product is ideally suited for drive-thru applications when
used in conjunction with the Marsh 610 Loop
Vehicle Detector. Details. |
 |
866/867 Saw-Cut Loop Kits
Marsh
Products' two Saw-Cut Vehicle Detector Loop Kits consist of 80 feet of
#16 awg
wire and loop sealant for the installation of a five-turn loop. The kits
are intended to be used after pavement installation; if pavement has not
been poured, the Marsh Products 865 Preformed Loop
is more cost-effective and easier to install. Two different types of
sealants are available: the 866 uses a pourable sealant; the 867 uses a
sealant in a cartridge that fits in a caulk gun.
Details. |
 |
853 Air Hose Vehicle Detector
The 853 Air Hose Vehicle Detector is a low-cost, easy-to-install vehicle
detection alternative for low-traffic applications. Simply attach the
10-foot air hose to the air switch enclosure at one end, lay the hose
across the driving lane and fasten the hose detector at the other end.
The air pressure switch is packaged in a weather-resistant metal housing
that can be mounted to a flat surface. Details.
|
