866/867 Saw-Cut Loop Kits

The Saw-Cut Vehicle Detector Loop Kits consist of 80 feet of #14 awg wire and loop sealant for the installation of a five-turn loop.
They are ideally suited for vehicle detection in traffic control environments such as drive-thrus or parking lots when connected to the Marsh Products 610 Loop Vehicle Detector. 
A concrete saw is used to cut a rectangular pattern in the concrete or asphalt. The kits are intended to be used after pavement installation; if pavement has not been poured, the Marsh Products 865 Preformed Loop is more cost-effective and easier to install. Two different types of sealants are available, depending upon the installation requirements.

866 Saw-Cut Loop Kit

The 866 Saw Cut Loop Kit is designed for use after pavement installation. The kit comes complete with enough wire and sealant to create a five-turn loop measuring 18 by 54 inches. The kit  includes a pourable, self-leveling sealant that cures rapidly, making it  well-suited for minimal lane closure time. It is ideal for traffic signals, parking lot gates, drive-thrus and traffic counter control.

Characteristics

84 feet of #14 awg machine tool wire for 18-inch-by-54-inch saw cut.
Two-part flexible sealer.
Adjustable cure time depending on amount of catalyst used.
Excellent adhesion to cement and cured asphalt.
Unaffected by freeze/thaw cycles.
Self-leveling to assure total encapsulation of wires.
Rapid curing to minimize length of time a lane must be closed.
Withstands corrosive effects of road salts, auto fluids and gasoline.
Connects directly to the Marsh Products 610 Loop Vehicle Detector.

867 Saw Cut Loop Kit

The 867 Saw Cut Loop Kit is designed for use after pavement installation. The kit requires no mixing, dispenses easily with a cartridge gun and is inexpensive to ship by all methods. It is ideal for traffic signals, parking lot gates, drive-thrus and traffic counter control.

Characteristics

84 feet of #14 awg machine tool wire for 18-inch-by-54-inch saw cut.
Single-part polyurethane.
Does not require mixing.
Dispenses directly from container with cartridge gun.
Flexible and tough seal.
Non-hazardous.
Can be shipped overseas and by overnight air.
Withstands corrosive effects of road salts, auto fluids and gasoline.
Connects directly to the Marsh Products 610 Loop Vehicle Detector.

Back to Vehicle Detection Products